Free calculator · No sign-up · Works on your phone

Christmas Glow Decor

Home → Guides

Christmas light timers and smart plugs — what to look for

Mechanical, photocell, digital and smart outdoor switching compared, why the load rating matters more than the features, and the schedule that cuts the running cost by a third.

A coil of warm white string lights resting on a dark surface

Some links on this page are Amazon affiliate links. If you buy through them we may earn a commission at no extra cost to you. It does not change what we recommend.

A timer is the cheapest improvement you can make to a display. It cuts the running cost, it means the lights are not on at three in the morning, and it removes the one chore that otherwise happens twice a day for six weeks.

The thing to check before any feature is the load rating.

The load rating comes first

Every timer and smart plug is rated for a maximum load, in watts or amps. A cheap indoor timer might be rated a few hundred watts. A large incandescent display draws well over a thousand.

Work out your display's wattage first — bulbs times watts per bulb — and then buy switching rated comfortably above it. Not equal to it: above it.

For reference, the continuous-load limit of a 15 amp circuit at 120 V is 1,440 watts, so no household display should exceed that on one circuit anyway. But a timer rated 500 watts will fail, and may fail hot, driving a 900-watt display.

Run your own numbers

The calculator does the arithmetic on this page for your own measurements — trees, rooflines, columns, railings, shrubs and windows.

Open the calculator

The four kinds

Mechanical dial timers. A rotating dial with pins you push down for the hours you want on. No programming, no battery, nothing to forget. They are the most reliable thing in this category, they lose a few minutes a month, and they do not care about power cuts beyond the clock drifting. If you want something that works for ten seasons, this is it.

Photocell switches ("dusk to dawn"). Switch on when the light level drops and off at daybreak. Zero setup and they track the changing sunset automatically, which is their real advantage. The drawback: dawn is a long way after anybody is looking, so they run the display for far more hours than necessary. Some combine a photocell with a run-time limit — on at dusk, off after six hours — which is the better arrangement.

Digital timers. Multiple on/off periods, often with separate weekday and weekend schedules. More control, and the thing to check is whether it keeps time through a power cut; the ones without a backup battery reset to midnight and then run the display at the wrong time for a week.

Smart plugs. Scheduling from a phone, sunset-relative schedules that adjust automatically, remote switching when you are away, and in many cases energy monitoring that tells you what the display actually draws. They need Wi-Fi that reaches where the plug is, which outside a brick wall is a real question rather than a formality. Also worth asking what happens if the internet drops: the better ones keep a local schedule, the worse ones do nothing.

Outdoor use is a separate rating

An indoor timer in a porch is still an indoor timer. For anything outdoors:

  • A weather-rated enclosure, not just a plastic box. Look for an outdoor or wet-location rating on the product itself.
  • Plug it into GFCI-protected supply. Outdoor outlets are required to have ground-fault protection, and a timer does not substitute for it.
  • Keep it off the ground so it is not sitting in standing water or under snow.
  • Multiple outlets in one enclosure are convenient for feeding several zones from one schedule — just check the combined rating covers everything plugged in.
  • Outdoor mechanical timersWeather-rated, no programming, nothing to reset after a power cut
    See options on Amazon
  • Outdoor smart plugsSunset-relative schedules and energy monitoring; check it reaches your Wi-Fi
    See options on Amazon
  • Photocell dusk-to-dawn adaptersThe simplest option; prefer one with a run-time limit
    See options on Amazon
  • Plug-in energy meterConfirms the display's real draw before you size a timer
    See options on Amazon

The schedule that saves the most

Most people leave lights on from dusk to bedtime, which is around six hours. The cheapest change available is to shorten it.

A sensible pattern: on at dusk, off at 11pm, and on again for an hour before dawn only if anybody is actually awake to see it — which they are not, so don't.

That is roughly five hours instead of a dusk-to-dawn fourteen. On an incandescent display the difference over a season is substantial; the arithmetic is in how much Christmas lights cost to run.

Three things to avoid

Chaining timers. One timer feeding another feeding another is a way to create a schedule nobody understands by January. One timer per circuit zone.

Exceeding the rating "just for a bit". Switch contacts fail closed as often as open, which means a failed timer may leave the display on permanently rather than off.

Relying on a smart plug as the only control. If the app, the hub or the Wi-Fi is down, you want to be able to reach a physical switch. Keep the display reachable by hand.

What a timer does not do

It does not make an unsafe display safe. It does not add capacity to a circuit — if the display exceeds the circuit limit, switching it on by schedule simply trips the breaker on schedule. And it does not watch the display: lights with damaged insulation are no safer for coming on automatically.

The safety checklist covers what does.

Last reviewed November 2026.