Free calculator · No sign-up · Works on your phone

Christmas Glow Decor

Home → Guides

How many Christmas lights per foot? The rule, and when to break it

The standard figure is 100 mini lights per vertical foot of tree. Here is where that number comes from, what it means for C7 and C9 bulbs, and the three cases where it gives the wrong answer.

A decorated branch with red baubles against a wall of golden lights

Some links on this page are Amazon affiliate links. If you buy through them we may earn a commission at no extra cost to you. It does not change what we recommend.

Almost every answer to "how many Christmas lights do I need" traces back to one number: 100 mini lights per vertical foot of tree. It is worth understanding where that figure comes from, because once you know what it assumes, you know when to ignore it.

The rule in full

Home Depot's Christmas lights buying guide gives the figure for both artificial and live trees: use 100 mini lights, or 50 traditional C7 lights, per vertical foot. On thin trees, use half that number. 1000Bulbs gives the same 100-per-foot baseline and suggests 200 per vertical foot for a brighter look.

So the rule is really a range, with three positions in it:

Look Mini lights per vertical foot A 7 ft tree needs
Sparse — slim or thin tree 50 350
Classic — the standard 100 700
Full — showpiece 200 1,400

Note what the rule measures. It is per vertical foot of height, not per foot of branch, not per square foot of surface. That seems crude, and it is, but it works for one reason: a taller tree is also a wider tree, so height alone is a decent proxy for how much surface there is to cover.

Which is exactly why the rule breaks when that stops being true.

Run your own numbers

The calculator does the arithmetic on this page for your own measurements — trees, rooflines, columns, railings, shrubs and windows.

Open the calculator

Where the rule gives the wrong answer

A slim or pencil tree. A 7-foot slim tree has nothing like the surface area of a 7-foot full tree, and 700 lights on it will look crowded and leave you with coils of unused string. This is the case Home Depot's "half that amount for thinner trees" is there for. Use 50 per foot.

A tree you light inside and out. The rule assumes you are lighting the outer surface. Wrapping individual branches from trunk to tip — the technique that makes a tree look lit from within — can take two or three times the baseline. If that is your plan, start at the "full" setting and expect to add more.

Bulb size other than mini. Larger bulbs are spaced further apart on the string, so you need fewer of them to cover the same tree. Home Depot's figure for C7 is 50 per vertical foot. Working from the counts it gives for a 9-foot tree — 600 to 700 C6 bulbs and 500 to 600 C9 — the per-foot equivalents come out at roughly 72 for C6 and 60 for C9.

Bulb Per vertical foot A 7 ft tree
Mini 100 700
C6 72 500
C7 50 350
C9 60 420

C9 needing more than C7 looks like an error until you remember these are counts of bulbs on commercially sold strings with different spacing, not a physical constant.

From bulbs to boxes

Knowing you need 700 bulbs does not tell you what to buy, because there is no standard string. A 100-bulb mini string might be 20 feet of lit length or 25, depending on spacing. So:

Strings to buy = bulbs needed ÷ bulbs per string, rounded up.

For 700 bulbs on 100-bulb strings, that is seven boxes. On 300-bulb strings, three. Always round up — a tree three quarters lit is worse than a spare box.

One practical warning: buy them all at once, in the same brand and the same shade. "Warm white" is not a standardised colour, and two manufacturers' versions of it next to each other on the same tree look like a mistake. If you are unsure, read warm white versus cool white first.

  • Mini LED light stringsThe baseline for the 100-per-foot rule, and far lighter on current than incandescent
    See options on Amazon
  • C9 LED light stringsThe larger bulb for rooflines and outlines, where fewer bulbs cover more run
    See options on Amazon

Rooflines are a different measurement

For a roofline you do not count bulbs per foot — you measure the run and buy that much string. Home Depot's guidance for anyone who has not measured is to start with at least 60 feet of string lights and add another 10 to 12 feet for every awning. That is a starting point for a shopping list, not a substitute for a tape measure; see how to measure your roofline.

The number the rule never mentions

Lights per foot tells you what to buy. It says nothing about whether your circuit can run it, and that is the figure that actually ruins evenings.

A 15 amp household circuit at 120 volts is rated 1,800 watts, and because Christmas lights run for more than three hours at a stretch they count as a continuous load, which should stay within 80% of the rating — 1,440 watts.

At roughly 0.4 watts per incandescent mini bulb, the "full" 1,400-bulb tree above draws about 560 watts. One tree, and you have used nearly 40% of the circuit. Add a roofline and you are over. The same tree in LED minis draws something like 100 watts.

That is the real argument for LED, and it is not about the electricity bill — it is about how much display you can run at all. The safety checklist has the rest of the electrical figures.

Last reviewed November 2026.