Free calculator · No sign-up · Works on your phone

Christmas Glow Decor

Home → Guides

How many Christmas lights by tree height — the full chart

Bulb counts for every tree from 4 to 12 feet, at three densities and in four bulb sizes, with the number of boxes and the wattage for each. One table, no scrolling through advice.

Warm golden bokeh from a lit tree in a bright room

Some links on this page are Amazon affiliate links. If you buy through them we may earn a commission at no extra cost to you. It does not change what we recommend.

If you came here for a number, it is in the first table. The explanation is underneath it.

Mini lights, by height and density

Tree height Sparse (50/ft) Classic (100/ft) Full (200/ft)
4 ft 200 400 800
4.5 ft 225 450 900
5 ft 250 500 1,000
6 ft 300 600 1,200
6.5 ft 325 650 1,300
7 ft 350 700 1,400
7.5 ft 375 750 1,500
8 ft 400 800 1,600
9 ft 450 900 1,800
10 ft 500 1,000 2,000
12 ft 600 1,200 2,400

Use the sparse column for a slim, pencil or thin natural tree. Use the classic column for a normal full tree — this is the standard rule and the right default. Use the full column for a dense showpiece, or if you wrap individual branches rather than the outer surface.

The 100-per-vertical-foot baseline and the instruction to halve it for thin trees are Home Depot's published guidance; the 200-per-foot figure for a brighter look is 1000Bulbs'.

Run your own numbers

The calculator does the arithmetic on this page for your own measurements — trees, rooflines, columns, railings, shrubs and windows.

Open the calculator

The other bulb sizes, at classic density

Tree height Mini C6 C7 C9
4 ft 400 290 200 240
5 ft 500 360 250 300
6 ft 600 430 300 360
7 ft 700 500 350 420
8 ft 800 580 400 480
9 ft 900 650 450 540
10 ft 1,000 720 500 600
12 ft 1,200 860 600 720

Mini at 100 and C7 at 50 per vertical foot are Home Depot's figures. C6 at about 72 and C9 at about 60 are worked back from the counts it lists for a 9-foot tree — 600 to 700 C6 and 500 to 600 C9.

Larger bulbs sit further apart on the string, so fewer of them cover the same tree. C9 showing a higher count than C7 is not an error: these are counts on commercially sold strings with different spacing, not a property of the glass.

How many boxes is that?

Divide the bulb count by what is on the box and round up. For classic-density mini lights:

Tree height 100-bulb boxes 300-bulb boxes
5 ft 5 2
6 ft 6 2
7 ft 7 3
8 ft 8 3
9 ft 9 3
10 ft 10 4

Always round up, and buy one spare of the same brand and shade. Whites do not match between manufacturers, and the brand will have changed its product by next year — so the spare you buy today is the only one that will ever match this tree.

  • Mini LED light stringsThe 100-per-foot standard; check the lit length on the box, not the overall length
    See options on Amazon
  • C9 LED light stringsFor large outdoor trees, where fewer bulbs cover more tree
    See options on Amazon
  • Light string testerConfirms a string before it goes on the tree rather than after
    See options on Amazon

What each tree draws

This is the column most charts leave out, and it is the one that decides whether your display works at all.

Classic density, incandescent versus LED:

Tree height Mini bulbs Incandescent (0.4 W) LED (under 0.1 W)
6 ft 600 about 240 W about 40 W
7 ft 700 about 280 W about 50 W
9 ft 900 about 360 W about 60 W
12 ft 1,200 about 480 W about 85 W

A 15 amp circuit at 120 V is rated 1,800 W, and because lights run for more than three hours they count as a continuous load, which should stay within 80% — 1,440 W.

So a single 12-foot incandescent tree is a third of the working budget for the whole circuit. Three of them is over the limit on their own, before the roofline. The same three trees in LED use less than a fifth of it.

Per-bulb wattage varies between manufacturers, LEDs especially. The real figure is on your box, and the calculator lets you type it in.

Two things the chart cannot tell you

Whether your tree is "full" or "thin". Hold a string against it: if the branches are dense enough that you cannot see through the tree, use the classic column. If you can see the wall behind it, use sparse.

How you intend to light it. Wrapping the outer surface is what these numbers assume. Wrapping each branch individually from trunk to tip — the technique that makes a tree glow from inside — takes two to three times as much, so start from the full column and expect to add.

Last reviewed November 2026.