Free calculator · No sign-up · Works on your phone

Christmas Glow Decor

Home → Guides

How much do Christmas lights cost to run?

The formula is watts divided by 1,000, times hours, times your own rate per kWh. Worked examples for a tree and a full display, in both LED and incandescent.

A large outdoor display with a lit cone tree under a canopy of bulbs

Some links on this page are Amazon affiliate links. If you buy through them we may earn a commission at no extra cost to you. It does not change what we recommend.

The honest answer for most households is: less than you expect if you use LEDs, and more than you expect if you light the whole house in incandescents. Here is how to work out your own figure rather than trusting anyone's average.

The formula

Cost = (watts ÷ 1,000) × hours per day × days × your rate per kWh

Three of those four numbers you already have. The fourth — your rate per kilowatt-hour — is on your electricity bill, and it varies enormously between states and suppliers. Any article that quotes you a dollar figure without asking for your rate is guessing on your behalf.

Finding your wattage

Multiply bulbs by watts per bulb:

Lights Watts per bulb
Incandescent mini about 0.4
Incandescent C7 about 5
Incandescent C9 about 7
LED mini under 0.1
LED C6/C7/C9 under 1

These are typical figures. The real one is printed on your box and LED strings in particular vary between manufacturers by a factor of two or more — so use the box where you can.

Run your own numbers

The calculator does the arithmetic on this page for your own measurements — trees, rooflines, columns, railings, shrubs and windows.

Open the calculator

Worked example: one 7-foot tree

Seven hundred mini lights, lit six hours a day for forty days — so 240 hours.

Incandescent, at 0.4 W per bulb, is 280 watts:

0.28 kW × 240 h = 67.2 kWh

At 15 cents per kWh that is about $10. At 30 cents, about $20.

LED, at well under 0.1 W per bulb, is in the region of 50 watts:

0.05 kW × 240 h = 12 kWh

At 15 cents, under $2.

So on one tree the saving over a season is a few dollars. Not nothing, and not a reason on its own to replace working lights.

Worked example: a whole house

Now the arithmetic changes character. A full display — roofline in C9, two wrapped trunks, shrubs and windows — can easily come to 2,000 incandescent bulbs, with the C9s doing most of the damage.

Say 150 C9 bulbs at 7 W (1,050 W) plus 1,500 minis at 0.4 W (600 W): 1,650 watts.

1.65 kW × 240 h = 396 kWh

At 15 cents, about $59. At 30 cents, about $119.

The same display in LED, at under 1 W for the C9s and under 0.1 W for the minis, comes to roughly 300 watts:

0.3 kW × 240 h = 72 kWh — about $11 at 15 cents.

That is a real difference. But notice something more important about the incandescent figure: 1,650 watts exceeds what one circuit can carry. A 15 amp circuit at 120 V has a continuous-load limit of 1,440 watts. That display cannot run on one breaker at all, whatever it costs.

Which is the actual argument for LED. The electricity saving is a bonus; the reason large displays are LED is that the incandescent version does not fit on the circuits a house has.

The cheapest change is not the bulbs

Before replacing anything, look at the hours. Every example above assumed six hours a day. Cut it to four and the cost falls by a third, for free.

A timer does this without anyone remembering to, and it also means the lights are not on at three in the morning when nobody is looking. For an incandescent display, a timer saves more money in one season than most people expect — and it is cheaper than a single box of replacement strings.

  • Outdoor timers and smart plugsCut the hours without having to remember; outdoor models are weather-rated
    See options on Amazon
  • Plug-in energy meterMeasures what your display actually draws rather than what the box claims
    See options on Amazon
  • LED light stringsWhere the running cost genuinely matters, this is the change that makes the difference
    See options on Amazon

If you want the real number

A plug-in energy monitor between the outlet and the display will tell you exactly what it draws, which is more reliable than any calculation — bulbs vary, and old strings with replaced bulbs vary more.

It is also the only way to know whether a bargain LED string draws what its box claims. Some do not.

Two things people get wrong

Confusing watts and amps. Watts are power, amps are current, and at 120 V one amp is 120 watts. Circuit limits are given in amps and light strings are labelled in watts, which is why the arithmetic goes through watts.

Assuming the meter is the limit. It isn't — the breaker is, and it is a much lower number than people assume. The cost of running a display and the feasibility of running it are separate questions, and the second one bites first. See how many lights you can connect together.

Last reviewed November 2026.